productos
Bomba autocebante KD 02
Bomba autocebante KD 02

Bomba autocebante KD 02

La bomba autocebante se utiliza principalmente para tratar el transporte de materiales que contienen gas. Por lo tanto, es ampliamente utilizado en las ocasiones que el nivel de líquido es inestable, y el nivel de líquido es más bajo que el de entrada para dibujar el material, y también se usa como retura en el sistema CIP. Y es el equipo de transporte necesario en el campo de alimentos, productos químicos, farmacia.

Consulta en línea
Products Description
The self priming pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occassions that the liquid level is instable, and the liquid level is lower than that of inlet to draw the material, and also used as reture in the CIP system. And it is the necessary convey equipment in the food, chemical, pharmacy, field. 
Specifications
10T-30T, 2.2KW-7.5KW
Material
The part contact with medium：AISI316L stainless steel
Other parts：AISI304 stainless steel
The sealing contact with medium：EPDM
Standards
DIN, SMS
Impeller
Open type impeller, there is no dead end
Operate condition
Health centrifugal pump is a few horizontal transport of high and low level, is not the self-priming type.
Surface treatment
The part contact with mdedium is polished, and other partis glass painted and sand blasted
Max inlet pressure
0.5MPa
Temperature range
-10℃--140℃(EPDM)
Flushed shaft mechanical sealing
water pressure: Max 0.1MPa
water lift: 0.25-0.5L/min
Configuration of "ABB" brand three-phase AC motor
The explosion-proof motor also available
It with excellent electric performance, and with low niose, low vibration, the protection grade is IP55, insulation grade is F.
Operate involtage：  ≤3Kw, 220-240V/380-420V, △/Y
>3Kw, 380-420V/660-690V, △/Y
Requency：50Hz/60Hz
Working method: continuous(SI）
Rotate speed: 1450r/min
Product wetted steel parts: Acidresistant steel AISI 316L(AISI304) Other steel parts: Stainless ateel AISI 304 Outside surface: Matt treatment Inside surface: Bright Product wetted seals: EPDM rubber

Product Show
Model
Flow
Sucking
Power
Inlet/Outlet
CIP-04
4T
6m
2.2KW
2"/1.5”
CIP-08
7T
6m
3KW
2”/2”
CIP-10
10T
8m
4KW
2.5”/2”
CIP-20
20T
8m
5.5KW
2.5”/2.5”
CIP-30
30T
8m
7.5KW
3”/2.5”